Apr 12, 2022 Mesaj bırakın

Elektroforetik profil macunu koruyucu filmin damgalanma fenomeni üzerine analiz

Elektroforetik alüminyum, elektroforetik alüminyum oluşturmak için alüminyum oksit film kaplama filmi koruyucu tabakanın yüzeyinde yapay olarak biriktirilen, doğru akım yoluyla suda -çözünür emülsiyon çözeltisine yerleştirilen anot olarak alüminyum oksittir.

Yüksek- dereceli elektroforetik alüminyumun ana özellikleri:

1. Güçlü boya filmi sertliğine sahiptir.

2, yüksek yapışma filmi ile yaşlanmadan düşmesi kolay değil.

3. Alüminyum oksitten daha güçlü hava direncine ve alkali direncine sahiptir.

4, yüzey rengi zengin, güzel, ayna-parlaklık efekti gibi.

Elektroforetik profiller dış mekanlarda kullanım için daha uygundur, ulusal standart 70 yıllık hava koşullarına dayanıklılık temel ikinci yüzey diğer yüzey işlemlerini öldürür.

Electrophoretic profile packaging materials are mostly used for strong adhesion film as a protective film, aluminum profiles in a protective film for a period of time, the film is torn to find that aluminum profiles have film printing or called watermark. There are two kinds of watermarks: one is volatile watermarks, which will disappear after a period of time after the film is torn. The two are non-volatile watermarks, which do not disappear after tearing the film for a year or two. The situation of volatile watermarking almost all aluminum plants have appeared. There are two kinds of watermarks: one is volatile watermarks, which will disappear after a period of time after the film is torn. The two are non-volatile watermarks, which do not disappear after tearing the film for a year or two. The situation of volatile watermarks has appeared in almost all aluminum factories, and there are two kinds of watermarks: one is volatile watermarks, which will disappear after a period of time after the film is torn. The two are non-volatile watermarks, which do not disappear after tearing the film for a year or two. The situation of volatile watermarking almost all aluminum plants have appeared.

Film watermarking is a common phenomenon, film such as air separation, and moisture formation, which has been recognized in the industry. Many factories have also done a large number of relevant experiments. There are several considerations:

1 katılaşma süreci deneyi

180 degrees 30 minutes basically appear watermark boundary, 200 degrees 10 minutes effect is also better than 180 degrees 30 minutes effect. So the temperature and time is quite key, especially in the case of heat will fade the coloring way, must be integrated to weigh the curing process and color.

2 koruyucu film viskozitesi ve su püskürtme deneyi

There were watermarks 24 hours after spraying film for both high viscosity and medium viscosity, while there were almost no watermarks 24 hours after spraying film for low viscosity. It shows that the viscosity of the membrane has a great relationship. But there is a phenomenon, if sprayed with pure solvents such as alcohol, there is no watermark on any viscosity. The author cannot find a reasonable explanation for this phenomenon. I'll leave that to the right person.

3. Elektroforez tankı çözümü ile ilgili sorunlar

Yukarıdakiler yalnızca sonuçların analizinden alınmıştır, ancak sorunu başka bir fabrikada ele almanın yolu, yazarın temel sorunun yönünü tanımasını sağlar.

It is also a watermarking problem, but the delivery is urgent, and the change of low viscosity protective film is not guaranteed to be a problem, but also to observe the time. The workshop director decided to rearrange the electrophoresis tank. (Pull out to empty slot, can be added later). The process was not changed and the problem disappeared. I can't remember any new grooves having similar problems.

Aşağıdakiler sadece bir çıkarımdır. Yazarın sahip olduğu ekipman şu anda doğrulamayı desteklemiyor.

In electrophoresis, only the solvent can not be tested. It can be inferred from the above phenomenon that the solvent is reduced, and the principle of recovery equipment is to filter water and solvent from the main tank to water washing, and the solid components of water washing return to the main tank, and achieve the purpose of recovery. The volatile nature of the solvent and the lack of laboratory equipment, resulting in the failure to quantify the proportion of solvent imbalance.

Çözücü dengesizliği, boya filminin kompaktlığına ve homojenliğine zarar verebilir ve boya filmine su girerek filigran oluşumuna neden olabilir.

Yukarıdaki üç noktayı özetleyin, sorunu bulmak için benzer vakaların karşılaştırılabileceğini umuyoruz.


Soruşturma göndermek

whatsapp

Telefon

E-posta

Sorgulama